Corrosion Resistant Bulk Molding Compound
These composites are typically unsaturated polyester or epoxy vinyl ester materials formulated to meet the strict performance requirements of pumps, pipe flanges & underground applications that are impacted by corrosive environments. The outstanding corrosion resistant properties make these products well suited for tough industrial applications.
Please note: all of our materials are custom developed to meet your specific requirements, if you don't see a product performance metric that meets your needs, call us to discuss your specific project requirements at 317.773.1766 or email us at sales-usa@idicomposites.com.
Corrosion Resistant Bulk Molding Compound
B90 Series – Corrosion Resistant Grade |
|||||||
Properties |
Glass Content 8% |
Glass Content 15% |
|||||
Imperial |
SI |
Imperial |
SI |
||||
Impact Strength-Izod Notched |
7.0 ft.lb./in. |
373 J/m |
10.0 ft.lb./in. |
533 J/m |
|||
Impact Strength-Izod Unnotched |
10.0 ft.lb./in. |
533 J/m |
12.0 ft.lb./in. |
640 J/m |
|||
Flexural Strength |
10,000 psi |
69 MPa |
12,000 psi |
83 MPa |
|||
Tensile Strength |
4,000 psi |
28 MPa |
5,000 psi |
34 MPa |
|||
Compressive Strength |
14,000 psi |
96 MPa |
16,000 psi |
110 MPa |
|||
Water Absorption (24 Hrs @ 23C) |
0.1 to 0.3% |
0.1 to 0.3% |
|||||
Barcol Hardness |
30 to 60 |
30 to 60 |
|||||
Heat Distortion Temp @ 264 psi |
>400 F |
>204 C |
>400 F |
>204 C |
|||
Specific Gravity |
1.5 to 2.0 |
1.5 to 2.0 |
|||||
Shrinkage |
0 to 0.2% |
0 to 0.2% |
|||||
Flammability (Average Burn Rate) |
0.31 in./min. |
.80 cm/min |
0.47 in./min. |
1.2 cm/min |
|||
|
Click to download a pdf of the B90 Series Data Sheet |
|||||||
The information on this sheet is a guide. The stated values reflect an average of several tests conducted on CI's goods. These values were obtained under ideal conditions and may not be replicated in any particular test, part, or application. Because the values achieved in actual parts depend considerably on part design, molding conditions, and testing methods, no guarantee is made or implied regarding values to be obtained in any specific test, part, or application. CI makes no warranty or representation as to the suitability of any of its goods for use in any application. CI relies on customer to conduct its own tests and judge for itself the suitability of CI's goods.
